High Temperature Resistant Centrifugal Pump Installer
produk baru
  • fzb pompa self-priming
    fzb pompa self-priming plastik fluorin

    fzb pompa self-priming plastik fluorine, sesuai dengan standar internasional, bagian meluap adalah plastik fluorine, bagian bantalan beban terbuat dari bahan logam, dapat dilengkapi dengan segel mesin ujung tunggal eksternal, segel mesin rakitan eksternal dan air pembilasan, dapat disesuaikan.

    Baca lebih banyak
  • pompa sentrifugal stainless steel
    ih stainless steel pompa air sentrifugal air laut tahap tunggal

    ih stainless steel satu tahap pompa air sentrifugal air laut garam dapat terbuat dari 304.316.316l dan baja stainless fase ganda super fase. itu adalah pompa transfer yang sangat baik dan pompa bongkar muat untuk mengangkut berbagai konsentrasi air laut, air garam dan pelarut organik.

    Baca lebih banyak
berita terbaru
ihf-d teflon berjajar pompa sentrifugal koneksi langsung

ihf-d teflon berjajar pompa sentrifugal koneksi langsung

ihf-d pompa sentrifugal berlapis fluor adalah produk yang disempurnakan dari pompa sentrifugal ihf berfluorin. apa yang lebih tahan asam daripada pomp

TNF-G high temperature Teflon magnetic pump

2020/03/09

Fluorine-lined high temperature magnetic pump


Fluorine-lined high-temperature magnetic pump is a brand-new magnetic pump designed according to high temperature conditions on the basis of classical fluorine-lined magnetic pump. The whole series of flattening uses the high temperature resistant fluoroplastic PFA, imported from Japan to redesign the structure of the parts, which strengthens the overall strength of the rotating parts, makes the design thicker and heavier, and meets the harsh conditions of high temperature conditions. The over-current parts of Tenglong high temperature magnetic pump are all made of imported PFA material to transport all kinds of high temperature and strong. 
Corrosion, granular medium. High temperature magnetic pump is a kind of non-contact moment transmission through magnetic actuator (magnetic coupling) to replace dynamic seal with static seal, so that the pump can achieve safety and no leakage.


Increase the life of high temperature pump: 
1. When the pump shell is started, when there is no pressure at the outlet, do not blindly increase the speed to prevent premature damage to the shaft or bearing. 
2. Because the pump shell runs at high temperature, the piping should be equipped with hinged support during cold installation to prevent piping displacement after heating up. 
3. The coupling must be thermally corrected after the pump body is heated to avoid additional torque during operation.


High temperature safety: ultra-high temperature resistance of over-current components, increased retention strength in the capital, effective reduction of grinding temperature rise, strong magnetic energy of high-row magnetic tiles. 
Four core accessories: 
1. The shell: the fluorine lining is smooth and clean and will not be deformed. 
2. Impeller rotor: corrosion-resistant and wear-resistant, running smoothly. 
3. Shaft sleeve: clearance coordination, diversion design, heat dissipation and cooling. 
4. External magnetism: rare earth magnetic steel.

   

tim profesional untuk melayani !